Generally, the appearance of anti-collision wall formwork presents wave shape, which is not very obvious. If all of them are connected together, it will not only have the function of beautiful environment, but also can greatly guarantee the driving guarantee. In case of traffic accident, the huge impact force generated cannot be solved. The appearance of wave can reduce the impact caused by sudden huge impact and reduce the impact Fewer vehicles are likely to collide in a row, reducing the number of casualties. The cast-in-place technology has very strict requirements for construction technology. The formwork shall be close to each other, and then the concrete shall be poured. The bubbles in the concrete shall be evenly stirred and discharged through vibration. After several hours of drying, the formwork can be directly demoulded. The same type of anti-collision wall formwork can use the same set of mold, reducing the production cost of the mold, and ensuring the quality problems. However, the mold is very huge, which can't be handled only by manpower. If there are some cracks and deformation problems in the mold, it needs to be replaced in time, so as to reduce the maintenance time of later maintenance personnel, improve the economic interests of both sides, and create a win-win situation.
The anti-collision wall is a kind of infrastructure that separates the road surface, but also forms obstacles in the middle and both sides. The anti-collision wall formwork is a kind of traffic facility, which is common in urban roads and intersections. The advantage of this cement product is that it is cold and heat-resistant, and can withstand the outdoor humidity and climate, especially we can also customize it according to the customer's requirements. The concrete anti-collision wall formwork anti-collision wall mold is an indisputable environmental protection product for the environmental protection cause. The mold can greatly reduce the emission standard, purify the environment, and has practical value. First of all, the weight of the anti-collision wall mold depends on its weight, because the high-quality anti-collision wall mold is relatively heavy, and it also depends on whether the appearance is glossy, because some mold manufacturers will water the anti-collision wall template, and then touch its hardness and thickness.