设为首页    收藏本站

华庆模具有限公司首页
      产品列表
防撞护栏模具
水泥防撞墙模具
防撞墙模具
防护墙模具
防撞墙模板
防撞墙钢模具
挡土墙模具
混凝土防撞墙模具
高速防撞墙模具
公路防撞墙模具
      资质荣誉
      联系我们
保定华庆模具有限公司
地 址:保定市城东工业区
电 话:18831266588
联系人:边经理
传 真:0312-8103818
在线QQ:107108222
行业新闻

防撞墙钢模具的施工要求

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

防撞墙钢模具分为可按施工方要求定做尺寸,一般高度为500mm,1000mm,1500mm,2000mm等等,根据不同高度选择原材料,如50mm用2.75普通钢板即可,主要是用筋板加固,筋板用80mm*60mm带钢即可,带钢又称为钢带,也可叫扁铁,带钢的质量要看含碳量的高低,含碳量高的带钢硬度好,生产的模具不易变形,施工方便,带钢粪冷轧带钢和热轧带钢,防撞墙模具一般要用热轧带钢,热轧带钢是经过加热——层冷——除磷——粗轧——精轧——表面检验——抛光等程序加工而成。

The steel mould of anti-collision wall can be divided into dimensions that can be customized according to the requirements of the construction party, with a general height of 500mm, 1000mm and 1500mm, 2000mm and so on. Select raw materials according to different heights. For example, use 2.75 ordinary steel plate for 50mm, mainly to reinforce with steel plate, use 80mm * 60MM steel strip for steel plate, also known as steel strip, or flat iron. The quality of steel strip depends on the carbon content. The steel strip with high carbon content has good hardness, the production mould is not easy to deform, the construction is convenient, and the cold-rolled strip and hot-rolled strip with strip feces, Generally, the anti-collision wall mould is made of hot-rolled strip steel, which is processed by heating, cooling, dephosphorization, roughing, finishing, surface inspection and polishing.

防撞墙钢模具是在交通安全建设中使用的一种设备,因为作用的特殊,所以对模具的质量要求很多,因此对模具厂家也有很高的要求,要求厂家必须一套或者多套完备的生产设施,有一条完整的产业服务。现浇防撞墙钢模具必须有严格的要求。这是基本的要求,对现浇防撞墙钢模具制作厂家的工作人员也有严格的要求,一般如果是生产制作人员的话,一定要进行专业的培训或者实战演练经验。如果是一般的刻骨人员的话,要理解防撞墙钢模具具体的尺寸,生产模具的原材料,钢材的厚度。

Anti collision wall steel mold is a kind of equipment used in traffic safety construction. Because of its special function, there are many requirements for mold quality, so there are also high requirements for mold manufacturers. Manufacturers are required to have one or more complete production facilities and a complete industrial service. The cast-in-place anti-collision wall steel mold must have strict requirements. This is the basic requirement, and there are strict requirements for the staff of the cast-in-place anti-collision wall steel mold manufacturer. Generally, if it is the production and production personnel, they must have professional training or practical drilling experience. If you are a general engraver, you need to understand the specific size of the anti-collision wall steel mold, the raw materials for the production of the mold, and the thickness of the steel.


【上一个】 防撞墙钢模板的结构特征 【下一个】 防撞墙模板施工过程的详细步骤


 · 防撞墙钢模板的结构特征 · 防撞墙钢模具的施工要求
 · 防撞墙钢模具的质量关要把控好 · 防撞墙钢模具的生产与环保相结合

|冀ICP备19007414号|防撞墙模具,防撞墙模板,防护墙模具,防撞墙钢模具——保定华庆模具有限公司 /冀ICP备19007414号-1 |护坡砖模具|沟盖板模具|隔离墩模具|排水沟模具|流水槽模具|护坡模具|流水渠模具