The production process of the anti-collision wall mold needs to be handed over to the factory with professional technology and a large number of production experience. Generally, it needs to go through multiple steps. It emphasizes the professional processing technology and the experience of cutting and welding data. The customer needs to submit the model or drawing required by the mold in the order first. Note that the drawing should indicate the length, width and height of each template Make specific drawings and then make them by the factory. Generally, it is necessary to start from the material selection first. The so-called Qiaofu can't cook without rice. Whether the material selection is high quality can determine the quality of the anti-collision pier steel mold. Therefore, Huaxing mold factory will select the steel plate with high hardness and good tolerance to make the mold, and then cut it according to the data on the drawing. Pay attention to the reasonable design in the cutting process, and try to save materials to save costs. After the initial cutting, the steel plate needs to be bent, welded and polished with advanced technology, each step is crucial.
When the anti-collision wall mold is removed, the workers should keep gentle action, so as to prevent the deformation of the steel plate caused by excessive force. In the process of formwork removal, the construction workers should stand in the safety platform, and then use tools to screw off the screws used to fix the steel plate, so that each part can be disassembled, then the parts can be removed, and placed in categories, to prevent excessive contact between the steel plates, resulting in corrosion and other substances damaging the steel plate. The disassembled parts shall be inspected and cleaned, the concrete materials and oil stains on the surface shall be wiped, and then the protective oil can be painted after simple drying, and then the parts can be stored in the warehouse by classification. If it is found that the concrete has not reached the design strength in the process of dismantling the formwork steel plate of the railway slag retaining wall, the demolition work shall be stopped, and the demolition can be continued after a period of maintenance work.