Anti collision wall steel formwork processing is combined with the needs of Highway Research and development, the name of the anti-collision wall is also very rich, there are isolation pier, anti-collision pier, anti-collision guardrail and other titles, from the name can be seen, the mold products play a role in anti-collision. The anti-collision wall is a kind of thing that people can see everywhere in their lives. It plays a very important role in the city. They are mostly used on mountain roads, highways, cliffs and ditches. The anti-collision wall is divided into many different types and shapes of objects, but their production and function are the same. Its purpose is to prevent out of control vehicles from crossing the bridge, to prevent vehicles from passing under the bridge, over the bridge and beautifying the function of bridge construction, playing a buffer role. In order to be more safe, an additional layer of protective fence will be added to the anti-collision wall. In the design, people rely on the force generated by the railing to protect pedestrians and prevent them from falling down. Most of the anti-collision walls will be painted with obvious stripes to prevent vehicles from seeing the road at night. The anti-collision pier is mostly used for black and yellow, and the anti-collision wall is mostly used for red, black and white. The production process of the anti-collision wall is inseparable from the anti-collision mold, with the anti-collision wall mold can be more rapid, safe production of the anti-collision wall. Anti collision strong mold is a large tool used to make molded articles. Anti collision wall is an important part of bridge deck. Using special steel as raw material, with reasonable design and special technology. The smooth material is not easy to be damaged. My factory produced the anti-collision wall mold, good workmanship, to ensure the beauty of the finished product.
At present, the main specifications of concrete anti-collision wall are 100 cm in length and 81 cm in height. This type of anti-collision wall mold is also relatively large, because according to the nature of highway subgrade and soil on both sides, the height of the anti-collision wall should not be too high or too low_ 100 * 81cm is mainly based on the construction drawings. In the common steel mould for anti-collision wall, the specification and size of the formwork should not only correspond to the construction road, but also be considered in terms of production cost and manual operation, which requires the manufacturer to introduce more on the anti-collision wall formwork. The commonly used anti-collision wall mold models are mainly in the height and length of the template, and the width between the top and bottom is basically fixed. The length of the common prefabricated parts of the anti-collision wall is basically set between 1-2 meters, and the use of 1 meter is more, because it will be more convenient in handling and production. And in the selection of template height, based on the height of 81 cm, this height of the prefabricated anti-collision wall is very large, and is widely used in various places.