Cast-in-place process and prefabrication process can be used to help die production, because the operation environment of anti-collision wall die is different, and their production methods are different, so we should choose the appropriate production process for the die. The name of the cast-in-situ anti-collision wall mould is because it is produced by cast-in-situ technology for a long time. Before processing, the mould needs to tidy up the construction environment and keep the ground clean, because the cast-in-situ anti-collision wall mould needs to be placed on a smooth ground in order to better process, and then the mould is assembled. Together, in the production process, we consider that the model of the die is too large. If there is no design, there will be great inconvenience in the following production steps, so we can make the die disassembly.
When splicing this kind of mould, we need to use the same size bolts and a large number of clips to cooperate. Place the spliced mould on the ground, or directly in the place where construction is needed. Through the painting of demoulding agent, the in-situ anti-collision wall mould has a strong lubricity, so that the mud can be used in the mould. In the process of production, there will be no easy adhesion. After that, a large number of prefabricated parts can be produced and used with the assistance of cast-in-situ technology. Anti-collision wall moulds are widely used. Because of its large size, steel moulds and concrete pouring moulds are usually selected to specialize in the production of high-speed anti-collision wall steel moulds of various sizes. Anti-collision wall steel moulds of various sizes are completely inexpensive. Welcome to purchase them. The raw material of the anti-collision wall die is steel plate. The iron plate simply reacts with oxygen, water and rust at a certain temperature. Although it has a certain effect, it will cause the steel die to be not smooth and the cement product to be colored. After using the die, the steel die should be kept in a dry and cool place.