The anti-collision guardrail formwork is a kind of steel formwork which can be directly supported on the site and spliced by two formworks. The internal concrete is poured into the formwork to vibrate and form. The anti-collision wall formwork is all applied in the construction of concrete anti-collision walls on both sides of the road, which will not be involved in other fields. Each batch of anti-collision wall formwork is made in accordance with the unified blanking mode. After all the steps such as bending and rib plate cutting are completed, wait for the welding of welding technicians.
From the main appearance of the anti-collision guardrail, it is similar to the isolation pier, but the obvious difference with the prefabricated parts of the isolation pier is that one side is a straight plate, which is mainly used with the periphery and the inside is a curved plate, so when placing the steel formwork, it is necessary to distinguish the inside and outside. The anti-collision wall mold is a kind of formwork that can be reused with high strength. No matter from the use time or durability, it is guaranteed by quality, which is directly related to the welding of the formwork and the thickness of the steel plate. Through long-term production of the mold, it can be found that sometimes the height of the internal mold is lower than that of the external mold, which is different in the production of the anti-collision guardrail template mold. Often, each concrete anti-collision wall used on the road will have a detailed design, and the manufacturer can directly process the template according to the drawing.