The mold design of high-speed guardrail is not a simple processing tool. It must be made according to the specified processing requirements. On the one hand, because of the production cost, if the high-quality steel materials are used for production, the price of the mold will be affected. On the other hand, it is also necessary to ensure the quality of the anti-collision guardrail produced. In production, the processing method is summed up after many tests, as long as the production of crash barriers is strictly in accordance with each step, then qualified prefabricated parts can be made, of course, the normal construction can also be carried out. First of all, for the mixing of mortar, a large number of cement, sand and aggregate will be selected for mixing, so that these materials can be better mixed. The prefabrication processing method can ensure the quality of the prefabricated parts, and will not damage the mold of the high-speed anti-collision guardrail. The completed mold should be cleaned in time, and the impurities such as mud or dust adhered to the mold should be cleaned up to ensure the cleanness of the mold, and it is convenient to continue to use it next time. The general mold of high-speed anti-collision guardrail has a processing time of up to three years. Proper cleaning and scientific storage can extend the service time of the mold, and the processed anti-collision guardrail can also be assured of construction.
The specific production requirements of high-speed guardrail mold are relatively strict, although he has no rigid requirements in size, his more common mode is to customize in sections, each mold is about 2 meters long, and his height is about 1 meter. He has no specific size standard. In addition, there are fixed requirements in the selection of plate, and the steel plate used is at least 3 mm Can bear a lot of load and impact, so that the mold in the production process can have a good effect, highway crash barrier template in the production of his size is very important, because the highway grade is not the same, the use of crash barriers are not the same, the main worry is that the mold size will have an impact on the product, anti-collision guardrail is a safety device on the road Shi, is a very important role, so after the completion of his production is the need to have a special inspection department to check, if the product is not qualified, it will bring immeasurable losses to customers, so the important tools for the production of highway anti-collision guardrail formwork, and even the treatment of every part of the details will affect the normal production of products, and the production of general formwork can be guaranteed The certificate is within a few meters, so when ordering the mold, it is mainly to see the professional production capacity of the selected manufacturer, and the mold with good quality can play a good effect.