The steel formwork of the anti-collision wall can be customized, so it should be processed according to the size of the drawing during the production, so as to ensure that the steel mold produced can meet the customer's standard. When making the mold, the first thing you need to do is to prepare it. Because it is the basis of making the mold, only the steel with high quality can be better used In the production process. The first thing we need to do is to cut the qualified steel plate. At present, laser cutting is a more advanced method, because it can ensure that the edge of the steel plate is smooth, and there will be no burr or curling, which will affect the normal use of the steel plate. After that, the steel plate will be bent, and the steel formwork of the anti-collision wall has radian. After welding these steel plates, at present, I often use the seamless welding processing technology, which can ensure that the produced mold has strong sealing performance, and will not have slurry leakage in the production process, which will affect the subsequent production and use. Then, the prefabricated anti-collision wall mold that has been made will be polished to avoid the steel plate surface from being stained with some during the processing Impurities.
Because the anti-collision walls are all cast on site, it needs faster rhythm and higher efficiency, and the mold of the anti-collision wall can just do this. The anti-collision wall steel formwork produced by Huaqing mold factory is made of steel materials with high hardness and good heat resistance. It adopts professional technology for planning and cutting, and through bending, welding, grinding and other steps, it ensures that the surface of the mold is beautiful, the interior is hard and smooth, and it is easier to demould. In specific application, it is not necessary to wait for the concrete anti-collision wall to solidify completely. Generally, the mold can be demoulded after 8 hours of mud injection. Because the surface of the mold is smooth, and with the help of release agent, as long as the pull rod is pulled out and the clasp is opened, the steel formwork of the anti-collision wall can be simply disassembled and poured for the next section.