The use method of steel mold of anti-collision wall is a kind of steel mold which can be directly supported on site, using the splicing effect of two molds, and pouring concrete vibration molding inside. The steel mold of highway anti-collision wall is all applied in the construction of concrete anti-collision wall on both sides of the highway, which will not be involved in other fields. The production of each batch of anti-collision wall mold is in accordance with the unified blanking mode, waiting for welding technicians to weld after the bending and rib cutting steps are completed. From the main shape of the anti-collision wall, it is similar to the isolation pier, but it is obviously different from the prefabricated parts of the isolation pier that one side is a straight plate, which is mainly used with the periphery, and the inner part is a bending plate. Therefore, when placing the steel mold, the inside and outside should be clearly separated.
The common use and introduction of highway anti-collision wall are made by cast-in-place steel mold of anti-collision wall. What is the anti-collision wall mold? From the name, we can see that the role of the anti-collision wall mold is anti-collision, and it also has protection. Therefore, the concrete anti-collision wall made by us requires large volume and heavy weight, so as to ensure that the vehicle will not move easily. On the highway, we often see red and white guardrails, which are customized by steel molds. Some simple highway anti-collision walls are produced by relatively small wood formwork or other material templates, but when it comes to large-scale highway anti-collision walls, all of them are cast on-site with anti-collision wall molds.
The steel mould of the anti-collision wall is manufactured according to different standards. In many components of the anti-collision wall, the one with the height of 81 cm is widely used, and there are also other standards. The competition in the mold Market of highway anti-collision wall is very fierce. If you want to stand firm, you should strictly guarantee the quality, add product types, and have a fair price. Only in this way can the ability be trusted by users and be carried out. The steel mold of the anti-collision wall is prefabricated with steel mold. Because some large plastic mold cannot be prefabricated, the steel mold factory specializes in producing various cement component molds for expressways and high-speed railways, and has steel mold workshop and plastic mold workshop. Professional technology can create high-quality products for you.