设为首页    收藏本站

华庆模具有限公司首页
      产品列表
防撞护栏模具
水泥防撞墙模具
防撞墙模具
防护墙模具
防撞墙模板
防撞墙钢模具
挡土墙模具
混凝土防撞墙模具
高速防撞墙模具
公路防撞墙模具
      资质荣誉
      联系我们
保定华庆模具有限公司
地 址:保定市城东工业区
电 话:18831266588
联系人:边经理
传 真:0312-8103818
在线QQ:107108222
最新资讯

光伏墩模具-光伏基座模具-水泥墩模具厂家

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

关于光伏墩模具的介绍生产出来的光伏墩一般都是采用预制的生产方式,这是一种比较常用的生产方式,因为这样的生产出来的产品的质量是比较高的,而且将生产出来的光伏墩运输到施工的现场能够加快工人施工的速度,减少施工的时间,这样对当地的交通的影响也是比较小的。这种模具在进行制作的时候是进行的操作是比较细致的,所以生产出来的光伏墩的表面是非常光滑的,而且使用的年限也是比较长的。我们的这种光伏墩主要就是应用在光伏发电设施的建设之上,发挥的作用是非常大的,这些工程对光伏墩的质量要求是比较高的,所以他们使用的都是使用预制的光伏墩。我们生产这种光伏墩一般都会使用光伏墩模具,他与其他的模具的使用方法是相同的。如果应用的建设工程不同那么需要的光伏墩模具的规格大小也是有所不同的,在制作之前要将注塑机的胎具更换成我们所需要的尺寸大小,我们制作完成的模具不可以直接卖给客户,需要对其的质量进行检测,这样才能保证我们的口碑。

About the introduction of PV pier mold, the PV pier produced is generally prefabricated, which is a common production method, because the quality of the products produced is relatively high, and transporting the PV pier to the construction site can speed up the construction speed of workers and reduce the construction time, In this way, the impact on local traffic is relatively small. The operation of this kind of mold is relatively detailed when making, so the surface of the produced photovoltaic pier is very smooth, and the service life is relatively long. Our photovoltaic piers are mainly used in the construction of photovoltaic power generation facilities and play a very important role. These projects have relatively high quality requirements for photovoltaic piers, so they use prefabricated photovoltaic piers. We generally use the photovoltaic pier mold in the production of this kind of photovoltaic pier, and the use method is the same as that of other molds. If the applied construction projects are different, the specifications and sizes of the PV pier molds required are also different. Before production, the molds of the injection molding machine should be replaced with the sizes we need. The molds we have made can not be directly sold to customers. Their quality needs to be tested in order to ensure our reputation.

光伏墩模具都是在预制厂实现生产的,预制厂是分为几大场地的,有生产预制件的场地、存放预制件的场地和储存模具的场地,下面简单的介绍一下模具的操作步骤。现浇的震动平台准备出来的,将上面杂物清理干净,然后将模具摆放到平台上的同时进行刷油,模具上需要刷油的位置不仅是内底面,内侧壁上也要刷刷上油,从模具的上下面的尺寸上来看是有锥度的,这是所有塑料模具都需要的考虑到的一点。可以使用铁锹或是平铲子将水泥装入六角板模具当中,将振动平台上所有模具灌满后再开启震动平台,因为刘防撞的容积是比较小的,所以震动几十秒之后就可以了。光伏基座模具的制作以都设计成带有锥度的样式主要是为了方便脱模,这样在等模具中的水泥完全风干后在将模具倒扣的时候里边的六角板才更容易从与模具脱离开来,而刷油步骤也是为了减小水泥和模具的粘连度,增强光滑性,但是尽量不要使用的废机油,废机油可能会导致预制件的颜色出现变化。

PV pier molds are produced in the prefabrication plant. The prefabrication plant is divided into several sites, including the site for producing prefabricated parts, the site for storing prefabricated parts and the site for storing molds. The following is a brief introduction to the operation steps of molds. When the cast-in-situ vibration platform is prepared, clean up the sundries on it, and then brush the oil while placing the mold on the platform. The position on the mold that needs to be painted is not only the inner bottom surface, but also the inner wall. From the dimension of the upper and lower parts of the mold, there is a taper, which should be considered for all plastic molds. You can use the spade or the flat shovel to load the cement into the six corner plate mold, then fill all the mold on the vibrating platform and then open the vibrating platform, because the volume of the collision avoidance is relatively small, so it can be vibrated after dozens of seconds. The PV base molds are designed with taper to facilitate demoulding, so that when the cement in the mold is completely air dried and the mold is buckled, the inner hexagonal plate can be more easily separated from the mold. The oil brushing step is also to reduce the adhesion between the cement and the mold and enhance the smoothness, but try not to use waste oil, Waste oil may cause the color of preforms to change.


【上一个】 混凝土浇筑模板-成型钢模板-塑料现浇模板 【下一个】 防撞墙模具如何科学使用


 · 光伏墩模具-光伏基座模具-水泥墩模具厂家

防撞墙模板,水泥防撞墙模板,高速防撞墙模板——保定华庆模具有限公司 /冀ICP备19007414号-1 |护坡砖模具|沟盖板模具|隔离墩模具|排水沟模具|